Friday, April 18, 2008

Mitsubishi Evolution IX


Mitsubishi introduced the Lancer Evolution IX in Japan on March 3, 2005,and exhibited the car at the Geneva Motor Show for the European market the same day.The North American markets saw the model exhibited at the New York International Auto Show the following month.The 2.0 L 4G63 engine got MIVEC technology (variable valve timing), boosting official power output to 286 hp (213 kW) and torque to 289 ft·lbf (392 N·m). The Evolution VIII first offered in 2003 would produce dynamometer readings of approximately 225 WHP and 225 lb·ft (305 N·m). WTQ with a flywheel power rating of 271/273 respectively. The Evolution IX typically pulls 255 WHP and 250 WTQ on a dynamometer, a difference of 30 hp (22 kW).

The USDM Lancer Evolution IX models (standard (or "GSR" in some markets), RS, SE, and MR) varied slightly in their performance capabilities. Subtleties unique to each model accounted for variations in acceleration, handling and top speed. The RS excluded features standard on the standard, SE and MR models (stereo system, power windows and locks, rear wiper, rear wing, trunk lining and sound insulation). The resulting weight savings of over 60 lb (27 kg) gave the RS a subtly sharper handling responsiveness that helped it shave fractions of a second off the lap times of other models on an identical course.[citation needed] However, the top-end MR had a high top speed, since its 6th forward gear allowed it to reach 165 mph (266 km/h) at 7,000 rpm compared to 157 mph (253 km/h) at 7,000 rpm in 5th for the RS and middle-positioned IX models.[citation needed] (Note: Data relevant to U.S. model specifications)

The IX MR retained the features of the Evolution VIII MR, like Bilstein shocks, a 6-speed manual transmission, a rooftop vortex generator, BBS forged wheels, HID xenon headlights, foglights, accessory gauge package, "zero lift" kit, special badging and an aluminum roof. All models continued to sport Recaro bucket seats, Brembo brakes and MOMO steering wheels. Additional revisions from 2005 included a closer gear ratio for the 5-speed manual transmission, new lighter Enkei wheels on non-MR models, a redesigned front end with a more efficient air dam (the most noticeable feature are the two small oval ducts to cool the intercooler pipes), and a new rear bumper with a diffuser undersurface to smooth out the airflow coming out of the car for non-US models. In an effort to reduce the price increase on the Evolution IX model,[citation needed] HID headlights were no longer standard equipment on the base IX (nor were they standard on the 2005 VIII), and were available only in the SSL package (Sun, Sound, and Leather), SE (Special Edition) and MR trims.

Three trims were available for Japan, Asia and Europe. Although all models used the same 286 hp (213 kW) engine, the torque differed from one model to another. In Europe, however, the Evolution IX was advertised to have 280 hp (206 kW). The GSR produced 295 ft·lbf (400 N·m) of torque, while the RS and GT produced 300 ft·lbf (407 N·m).

* RS - revised 5-speed, aluminium roof, gauge pack, minimal interior, LSD and a titanium-magnesium turbine, left-hand drive option available.
* GT - revised 5-speed, this is basically the RS mechanically, but with some of the GSR's features (mainly interior pieces).
* GSR - 6-speed, Bilstein monotube shocks, aluminium roof, gauge pack, SAYC (Super Active Yaw Control), and double-din radio (this is roughly equivalent to the USDM MR).

In the United Kingdom, the Evolution IX used a different model scheme based on the cars horsepower. There were initially three models available: the FQ-300, FQ-320 and FQ-340 each with around 300, 320 and 340 bhp (254 kW) respectively. An FQ-360 model was subsequently released as a successor to the Evolution VIII FQ-400. While the new FQ-360 produced less horsepower than its predecessor, it had more torque at 363 lb·ft (492 N·m) at 3200 rpm - 8 lb·ft (11 N·m) more than the FQ-400. All four models were designed to run on super unleaded petrol only.

* FQ-300, 320, 340 - 6-speed, Bilstein monotube shocks, AYC (Active Yaw Control), super unleaded petrol only
* FQ-360 - 6-speed, Bilstein monotube shocks, AYC (Active Yaw Control), Ralliart Sports Meter Kit, carbon front splitter, Speedline alloy wheels, super unleaded petrol only

All four models were available in the US. All models used the same 286 hp (213 kW) engine. All models used a front and rear Limited Slip Differential, and an Active Center Differential.

* Standard - revised 5-speed, standard model
* RS - revised 5-speed, aluminum roof, gauge pack, minimal interior
* SE - Special Edition, aluminum roof/hood, and front fenders, split seven-spoke forged aluminum BBS wheels in "diamond black" finish, HID headlights with integrated fog lights, red-stitched Recaro seats
* MR - 6-speed, Bilstein monotube shocks, split seven-spoke forged aluminum BBS wheels, aluminum roof, hood, and front fenders, gauge pack, HID headlights with integrated fog lights, vortex generator, and custom MR badging.

To the standard (or "GSR") model, the Sun, Sound and Leather package added a power sunroof, HID xenon headlamps with integrated fog lights, a slighty different stereo headunit (with no integral amplifier), slightly upgraded speakers in the front doors and parcel shelf, a 4.1-channel amplifier under the driver's seat, a powered, trunk-mounted Infinity subwoofer, black leather seating surfaces, leather-trimmed door panels, slightly revised center armrests in the front and rear, and separate rear side headrests. This model deleted the GSR's headliner-mounted sunglass holder to make room for the sunroof.

A 2,500-piece, limited edition Evolution IX station wagon was released in Japan soon after the sedan's debut. It used the back end of the Lancer Sportback wagon grafted onto the sedan. Two trim models were introduced: the GT with a six-speed manual transmission and the GT-A with a 5-speed automatic. Other than the station wagon rear end, redesigned seats and some chromed trims, the car's interior was the same as the sedan.

Mitsubishi also developed the Evolution MIEV, based on the Evolutions IX's chassis but with four electric motors connected to the wheels as a test bed for the Mitsubishi In-wheel Electric Vehicle (MIEV) next-generation electric vehicle. The in-wheel motors used a hollow doughnut construction to locate the rotor outside the stator, unlike other electric motors where the rotor turns inside the stator. The result of this was a lighter motor which translated into lower unsprung weight than a system with the motors mounted in the wheels. Each in-wheel motor produced a power output of 68 hp (51 kW), thus giving a combined output of 272 hp (203 kW), comparable to that of regular, petrol powered Lancer Evolutions. The car competed in the Shikoku EV (Electric Vehicle) Rally 2005.

No comments: